Are you one of those who struggle to find a WI-FI signal in your own home? Despite spending a considerable amount to avail the best broadband connection from a suitable internet service provider, it becomes frustrating when your WI-FI does not function just as you expect it to. Have you ever thought this can be owing to the wrong placement of the router at your home?
Let’s get the facts correct, your WI-FI strength signal is massively dependent on the placement of the router. So, selecting the correct position to place your WI-FI router can be as essential as selecting the right router. Placing your WI-FI router in the right place can enhance your internet speed without spending an additional amount on the monthly plans offered by the internet service provider. A few minor adjustments in the WI-FI router can assist you to eliminate any WI-FI woes.
Centralise router location –
For enhancing the coverage area, try placing your wireless router in the centre of your house to enjoy a uniform signal strength throughout the rooms. If you are extremely worried about the hanging wires spoiling your area’s aesthetics, the correct solution for you is not to hide your router, instead enclose those wires.
Out of sight and out of range –
The router must be placed in the correct spot from where it is visible. So, it is prudent if you place the router on the mount/shelf on the wall instead of keeping it inside the cupboard. Commonly, many are propelled to install the router in rooms where the wireline comes into the home regardless of where the internet connection is required. If possible, place the router near to the user for better WI-FI signal strength. Proper placement of the router can enhance its signal by two folds. So, do not place the WI-FI router in a cupboard or closet.
Concrete walls, metal and floor objects are the nemesis –
Metal, floor objects and concrete walls can interfere with wireless signals. This means the closer your WI-FI router is to any of such objects, the slower your WI-FI strength. Thick walls basically are one of the major reasons why you may get a weak internet connection inside your room. While it is impossible to eliminate all three of the objects, you require to select a location with the least interference. Also, mirrors and metals reflect massive radio waves. For instance, you can select a spot by lowering the number of concrete walls the WI-FI signal requires crossing, avoiding placing it in front of any metal objects, particularly a television or microwave or cordless phone base or also a metal door. Placing the WI-FI router near the window may lead to a few signals going out. Water bodies like fish tanks can also interfere with radio signals.
The higher the better –
WI-FI connections go up and down, so if you put the same on the floor, the proportion of the signal may traverse down. Thus, you should avoid putting the router close to the floor. It is best to place the router high up to get higher internet coverage. So, if you stay in a multi-storey house, it is recommended to put the router higher up close to the roof for coverage throughout both floors.
Antenna position is important –
For a horizontal reach, ensure to position the WI-FI router’s antenna a little upwards or sideways for a vertical reach. A common thing you must note here is to not place the antenna in the direction of the wall or other obstacles and avoid positioning the antenna at 90 degrees. The advised angle is between 45 and 60 degrees. In case your router has 2-3 antennas, you can simply point each of them in distinct directions to evenly spread the range throughout your home.
A better understanding of the technology –
As you might be aware, a WI-FI router provides a wireless internet connection to devices through radio waves and manages network traffic. It is the same as tuning into your favourite radio station, and in the case of weak radio signals then connecting to the same may be difficult. To place this simply, the farther your electronic devices are from the WI-FI router, the poorer the internet signal strength is and thus the network speed may be slower. The most typical 3.5-inch brick wall, 1.75-inch solid door, and 2 inches of marble – all will attenuate a 2.4 gigahertz of WI-FI signal by nearly 50 per cent. So, hindrances or obstacles around your home can result in a 75 % reduction in the internet signal strength within proximity of around 100 meters.
Most understandably, this is the reason you get a zero-signal strength in rooms farthest from the WI-FI router. At times, the interference might happen just at a specific time of the day. This can be due to external reasons. For example, when a neighbor turns on the WI-FI router or the cordless router at a specific time during the day. With the ever-rising number of devices, it is difficult to witness an interference-free environment. However, you still can opt for the least congestion and interference with a minor adjustment to the placement of your router.
Conclusion
Nowadays, the internet network is one of the crucial things that affect every aspect of our life. No matter whether you are a teacher, student, working professional, or entrepreneur, a stable internet network is a must to accomplish your daily tasks. Thus, a good WI-FI connection is a must.
However, even after choosing the right internet provider and making timely payments, you may find yourself frustrated because of a weak signal. In that case, you might want to check the positioning of your WI-FI router. In case, your WI-FI signal is still weak, then consider researching for a quick WI-FI connection from a good internet service provider